New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Installation Across Winter Park
Door installation in Winter Park means working with homes built before air conditioning, before impact glass, and often before standard lumber sizes. A replacement entry door here rarely comes off a shelf and fits. We know that because our Door Installation team measures for jamb depths on 1920s masonry walls along Palmer Avenue the same week we quote a 1990s stucco home near Lake Sue. Whether you need a front door replaced, storm protection added, or a historic door restored rather than swapped, call (850) 493-7894. We’ll give you a written price before any work starts.
Our schedulers respond to Winter Park jobs from our metro office, with local crews dispatched to your neighborhood. We handle the full range, from Door Installation that meets current Florida Product Approval to lead-safe restoration of original steel casements, without forcing your home to fit one brand’s catalog.
Why Westlight Windows Orlando Is Winter Park’s Preferred Door Installation Company
Winter Park homeowners tend to know exactly what they want and exactly what went wrong last time. That works well with how Owen Satterfield runs Westlight Windows Orlando. Every job starts with a written price, a real arrival window, and a guarantee put in writing before a single screw turns. We have been doing this since 2009 as an independently owned and operated Kingswell location, and the Kingswell Guarantee applies to every project in Winter Park: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.
But what actually matters on a Winter Park job is that our technicians know the difference between a 1950s ranch jamb and a 1920s masonry opening. They know that original steel door frames on Old Winter Park Road are often 2-1/4 inches thick, and that off-the-shelf units leave gaps that fail wind-load inspection. They know Winter Park’s preservation review process, and they know that an exterior door facing Florida’s afternoon thunderstorms needs proper flashing or it warps within two summers. Background-checked, uniformed technicians handle every job, and when you call, a live person answers, 24 hours a day, 7 days a week. Not a voicemail box.
Door Repair in Winter Park
Door Repair in Winter Park is often a better-served job than replacement, especially on historic homes where the existing jamb is perfectly sound and the real problem is a failed hinge, a warped stile, or rotted sill. Our crew starts by determining whether the door is worth saving. On a 1950s ranch near Winter Park High School, the answer is usually straightforward. On a 1926 Spanish Colonial near the Winter Park Golf Course, saving a door can mean fabricating parts that no manufacturer has made in 70 years.
Historic Door Restoration and Hardware Matching
Many Winter Park doors from the 1920s carry original brass handles and escutcheons with profiles that are no longer manufactured. When repair is the right call, we remove hardware carefully, document every detail, and fabricate replacements to match the original. Lead-safe procedures under EPA RRP rules are standard on these jobs, not an add-on. We never sand lead paint into dust on a Palmer Avenue front porch.
Sagging, Binding, and Frame Repair
A door that binds every August in Winter Park is usually fighting humidity. Wood frames swell; old steel frames rust at the threshold. In many cases, we rehang the door, replace the hinges with heavier-gauge units, and correct the flashing so water stops wicking into the jamb. Door repair work like this typically runs $220 to $520 in Winter Park, depending on what has failed.
Exterior Door Installation in Winter Park
Exterior Door Installation in Winter Park means planning for wind loads, humidity, and existing wall construction before the first measurement. We carry eight manufacturer lines, including Therma-Tru, PGT, CGI, and ECO Window Systems, so the product you get is the product your house actually needs. Impact-rated doors are common here because Winter Park sits in a HVHZ wind zone where hurricane-season wind loads govern the structural requirements for exterior openings.
Impact-Rated Front and Entry Doors
For a front entry door in Winter Park, expect to pay $2,800 to $7,500 installed depending on size, glazing, and whether the new door includes reinforced hardware. Impact-rated entry doors are heavier than standard units, and they require proper anchoring into the existing wall. Our written quotes include all anchoring, flashing, and finish work, so there are no revised invoices at the door.
Storm Doors and Wrought-Iron Style Units
Storm doors in Winter Park run $650 to $1,800 installed and serve double duty: added protection against wind-driven rain and an extra layer between a historic door and Florida’s summer heat. On brick streets where a 1920s entry door is protected by a porte-cochere, a storm door may be unnecessary. We’ll tell you if that’s the case before we sell you one.
Trusted Brands We Service in Winter Park
We stock and install products from CWS, ES Windows, ECO Window Systems, Mr-Glass, and several other manufacturers, which means a Winter Park homeowner doesn’t wait six weeks for a common part that a competitor orders from a distributor. Impact-rated PGT and CGI units are available for hurricane-prone exposures, while ECO Window Systems provides energy-efficient glazing that holds up to Winter Park’s summer heat. Because we carry eight lines rather than one or two, the recommendation you get is the product that fits your wall, your preservation review, and your budget, not the product we happen to have on the truck.
Need something specific? We’ll match it across Door Installation in Winter Park without forcing you into a single brand’s catalog.
Common Door Installation Problems We See in Winter Park Homes
- Off-the-shelf doors that leave wind-load gaps in historic masonry walls. Original steel jambs in Winter Park’s 1920s homes are often 2-1/4 inches thick, while modern pre-hung units are built for 1-1/2 inch wood frames. The result is a gap that compromises the wind-load path and fails Florida Product Approval inspection. We order or fabricate units sized to the actual opening.
- Lead paint on original door frames. Contractors in a hurry sand 1920s door frames and create lead dust on oak-shaded streets like Palmer Avenue, which violates EPA RRP rules. Our crews follow lead-safe work practices as standard procedure on any pre-1978 home.
- Exterior doors rated only for non-HVHZ zones warping within two summers. Winter Park’s humidity and afternoon thunderstorms destroy cheap door slabs quickly. A door not rated for high-velocity hurricane zones will warp, the insulated glass unit will crack along the jamb, and the warranty won’t cover it.
- Preservation review rejections on historic districts. A door installed without documentation of the original sightlines and hardware can force a homeowner to remove and redo the project at full cost. We document every sash detail and coordinate with the homeowner’s architect before installation, which is why our Palmer Avenue projects pass review the first time.
Pricing for Door Installation in Winter Park, FL
A standard exterior door replacement in Winter Park runs $1,400 to $3,800 installed, while impact-rated entry doors with laminated glass run $2,800 to $7,500. French or double door installations run $3,500 to $9,000 depending on width and glazing, and storm doors run $650 to $1,800. Historic door repair work, including hardware matching and lead-safe restoration, typically runs $220 to $520 for common hinge, threshold, and flashing repairs, with fabrication work quoted separately.
What drives cost in Winter Park specifically is masonry wall thickness, preservation review requirements on historic properties, and whether the opening needs reinforcement to meet HVHZ wind loads. You’ll get a written, line-item price before any work is ordered, and that price is fixed. No change orders at the door. Call (850) 493-7894 to schedule your free estimate.
We Also Serve Cities Near Winter Park
Our Winter Park-based crews also cover Maitland, Orlando, Winter Springs, and Longwood. If you’re in a neighboring community with a similar home age or historic district concern, we bring the same written pricing and the same attention to jamb depths and preservation review. You don’t need to live inside the city limits to get the same service.
Serving Winter Park, FL - Our Local Coverage Area
We’re based in the Winter Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Installation in Winter Park
Yes, almost certainly. Winter Park’s historic district rules require preservation review for exterior changes on contributing structures, and a door replacement that changes the sightline or hardware profile will need documentation. We coordinate with your architect and the city review process, and we’ve handled this on Palmer Avenue and Old Winter Park Road more times than we can count. Call (850) 493-7894 and we’ll walk you through what your specific home requires.
In most cases, yes. Original steel French doors can often be restored with lead-safe paint removal, hand-fabricated glazing clips, and new impact-rated laminated glass installed in the original jambs. We’ve done exactly this on Palmer Avenue, matching original brass hardware with newly fabricated escutcheons. Restoration isn’t always cheaper than replacement, but it preserves the sightlines that make your home what it is. We’ll give you an honest comparison before you decide.
For custom impact-rated doors, you’re typically looking at 6 to 10 weeks from order to installation, depending on the manufacturer and the glazing package. Standard Therma-Tru units arrive faster, often within 3 to 4 weeks. Here’s what matters: we order your door the week you sign the quote, and we don’t start the clock late. When you get a lead time from us, that lead time is in writing.
Yes, if the door is part of the same wind-load path as the windows. A home with impact windows but a standard exterior door has a weak point that can fail and cause wind-driven rain to enter. In Winter Park’s HVHZ wind zone, openings need consistent protection. We’ll evaluate your specific exposure and tell you honestly whether an impact-rated door is required or just recommended.
Humidity is the culprit. Winter Park’s summer humidity swells wood frames and causes hinges to shift, which makes the door bind at the strike plate. The fix is usually heavier-gauge hinges, a properly shimmed frame, and corrected threshold flashing so water stops wicking into the jamb. Repair typically runs $220 to $520. We can tell you after a single visit what your door actually needs.
Written by Owen Satterfield, Owner at Westlight Windows Orlando, serving Winter Park since 2009.
Six Reasons Homeowners Choose Westlight Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.