VLX 500 Sliding Window

VLX 500 Sliding Window in Orlando, FL | Westlight Windows Orlando

The VLX 500 Sliding Window is a high-performance aluminum sliding system built around two things Orlando homeowners actually care about: clean sightlines and glass that glides without a fight. Slim aluminum frames, two or three track configurations, and hardware that moves smoothly even after years of humidity exposure. Westlight Windows Orlando is an authorized installation partner for ViewLux, which means you get the product through a local Orlando installer who measures, orders, and installs it to manufacturer spec. If you’re planning a remodel, a new build, or replacing a stuck, foggy slider in the greater Orlando area, call us at (850) 493-7894 and we’ll walk you through the options and put together a written quote.

Call (850) 493-7894

Product Overview – VLX 500 Sliding Window

The VLX 500 from ViewLux is a high-performance aluminum sliding system designed for wide openings where you want maximum glass and minimal frame. Think lanai-facing living rooms, master bedrooms opening onto screened patios, lakefront line of sight from the kitchen. Orlando architecture leans heavily on indoor-outdoor flow, and the VLX 500 was built for exactly that condition. With a profile width of just 1.97 inches, the frame nearly disappears into the wall, leaving you with a wall of glass and a sill line that doesn’t trip up bare feet.

The engineering underneath matters more than the look. The frame is cut from aluminum with a wall thickness of 0.079 inches, which gives it structural integrity without the bulk of older aluminum frames from the 80s and 90s that Orlando homes are full of. The roller system and track geometry are what people notice first, though. The sash moves with an effortless glide, no lifting, no shoulder into it. That’s not marketing language. When we install one in a home in College Park or Dr. Phillips, the first thing the homeowner does is slide it back and forth a few times because it feels different from what they had. It’s a genuine jump in build quality.

Buyers choose this series for three reasons: the slim profile, the smooth operation, and the ability to configure it as a 2-track or 3-track system depending on how many panels they want to move. A 2-track gives you one fixed panel and one sliding panel. A 3-track opens up to two sliding panels and one fixed, so you can get a much larger clear opening. That matters in Orlando where evening cross-breeze is the difference between running the AC and not. The VLX 500 is available through Westlight Windows Orlando across Orange County, Seminole County, and surrounding areas.

Technical Specifications

Here’s what the VLX 500 is built from, in plain terms. If you want the full engineering packet for a specific project, call (850) 493-7894 and we’ll send it over.

• Frame profile width: 1.97 inches, slim-line aluminum with engineered thermal separation
• Aluminum wall thickness: 0.079 inches for torsional stiffness across wide spans
• Track configurations: 2-track (one fixed, one sliding) and 3-track (two sliding, one fixed)
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated (including impact-rated laminated for windborne debris zones)
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Retractable screen and sliding screen
• Performance compliance: AAMA 2400/2410 installation standard, AAMA 812 low-expansion foam sealant on all perimeter joints, NFRC-rated thermal performance

Every VLX 500 we order for Orlando homes is sized to the opening, not pulled off a shelf. That means custom widths and heights are standard practice, not an upgrade.

Performance Features

Thermal Efficiency – The VLX 500 uses thermal break technology inside the aluminum frame, separating the exterior and interior metal so the Orlando summer heat doesn’t radiate straight through the sash. NFRC-rated energy performance means you can compare actual numbers, and the Low-E glass option further cuts solar heat gain, which matters in a city that gets more than 230 sunny days a year.

Acoustic Performance – Living on a busy Orlando corridor like Semoran Boulevard or near I-4 puts constant traffic noise at your back wall. Laminated glass adds a real barrier against road noise, while the tight frame fit and quality perimeter sealing reduce sound leakage around the sash. The result is a noticeably quieter room, even in a pre-1980 home that wasn’t built for it.

Airtightness & Weather Seal – Central Florida humidity is relentless. The VLX 500 is engineered for airtightness using compression gasket systems at every meeting rail and perimeter joint. Proper air sealing is what stops condensation inside the frame, prevents dust intrusion during dry season, and keeps your AC from working harder than it has to. Every Orlando install we do includes AAMA 812 low-expansion foam sealant on all perimeter joints, not just the visible ones.

Waterproofing – Sliding windows in Orlando take direct wind-driven rain from afternoon thunderstorms roughly half the year. The VLX 500’s sill design channels water outward rather than letting it pool, and the drainage paths are tested to handle sustained rain without leaking into the wall cavity. Combined with installation per AAMA 2400/2410 standards, the system holds up in real-world Florida weather, not just a showroom.

Wind Resistance – Central Florida wind-load requirements vary by location and exposure. The VLX 500 is wind-load rated for local climate requirements, and the impact-resistant laminated glass option is there if your home sits in a windborne debris zone under Florida Building Code. That configuration is what you want in places like Lake Nona or Windermere where a projectile hitting the glass is a genuine scenario during hurricane season.

Security & Hardware – The locking mechanism is integrated into the meeting rail with a low-profile design that doesn’t interrupt the sightline. Multi-point lock options are available. Tempered glass adds shatter resistance, and laminated glass adds intrusion resistance on top of that. For ground-floor sliders in Orlando neighborhoods, this is the kind of hardware quality that actually matters when you test it against the old builder-grade window that came with the house.

Color & Glass Options

The VLX 500 comes in six finish options, which gives you real design flexibility whether you’re working with a 1950s ranch in College Park or a new contemporary build in Winter Park. Premium Black is the go-to for modern farmhouse and industrial-loft palettes; it frames the glass sharply and hides dust well. Pure White suits coastal and transitional interiors and reflects heat effectively. Anodized Silver gives an architectural, almost commercial look that pairs well with concrete and steel details. Bronze and Champagne are both warmer metallic tones, with Bronze leaning traditional and Champagne offering a muted, premium warmth that fits Tuscan and Mediterranean exteriors common around Dr. Phillips and Windermere. Teak Wood is a wood-grain finish that reads as timber from five feet away but never rots, warps, or needs resealing, which is a practical advantage in Florida’s humidity. All finishes are baked or anodized to resist UV fading.

On the glass side, Clear is the baseline, bright and honest. Frosted works for bathrooms, private bedrooms, and any window facing a close neighbor. Low-E is the energy upgrade most Orlando buyers choose; it conditions the sunlight entering through wide sliding panels without dimming the room. Tempered glass is standard in doors and adjacent sidelites due to building code safety requirements. Laminated glass is the one to pick if you’re after impact resistance, sound reduction, or both. Many of our Orlando homeowners combine Low-E with laminated in the VLX 500 for year-round comfort and storm season peace of mind.

Installation by Westlight Windows Orlando in Orlando

Most window failures in Florida are installation failures, not product failures. A sliding window that leaks, binds, or drafts after a year was usually not installed square, plumb, and level. The VLX 500 is a precision-manufactured system, and if the opening is off by even a little, you’ll feel it in the glide and see it in the gaps. Westlight Windows Orlando has installed ViewLux products across the Orlando metro, and every job goes through the same process, no exceptions.

We start with a pre-install inspection of the rough opening. We check for structural issues, rot, and uneven framing, and we document what we find before any new window goes in. Then we set the frame level, plumb, and square using the manufacturer’s tolerance, shimming where needed so that the VLX 500 operates exactly as engineered. All perimeter joints are sealed with AAMA 812 low-expansion foam sealant. This step matters in Orlando specifically because our daily temperature swings and wet-to-dry cycles cause frames to expand and contract. Cheap caulk cracks. Proper sealant doesn’t fail in a season. The installation follows AAMA 2400/2410 standards, which is the recognized installation standard in the industry. After the window is set, we run a water test on the sill and perimeter, verify the drainage paths, and confirm the sash glides correctly in both directions. Then we clean the site, including the glass.

Here’s the thing about warranties. ViewLux backs the VLX 500, but manufacturer coverage applies when the product is installed correctly. If a handyman or a generalist contractor sets the window wrong, the warranty conversation gets complicated fast. Westlight Windows Orlando is an authorized installation partner in Orlando, which means our installs are done to spec and the warranty stays intact. That’s not a small detail. It’s the reason some people who buy premium windows end up with problems and some don’t. The difference is the installer. Call us at (850) 493-7894 and we’ll inspect your opening and tell you honestly what the project involves.

Frequently Asked Questions – VLX 500 Sliding Window

What is the lead time for the VLX 500 Sliding Window?

Lead times for the VLX 500 in the Orlando market typically run 3 to 6 weeks from finalized order depending on finish selection, glass type, and track configuration. Custom finishes and impact-rated laminated glass can add time. Call (850) 493-7894 and we’ll give you a current production estimate for your exact configuration.

Does the VLX 500 qualify for energy tax credits?

The VLX 500 can qualify for the Energy Efficient Home Improvement Credit when configured with eligible Low-E glass that meets the current ENERGY STAR requirements for the South climate zone, which Orlando is in. The credit amount and eligibility change periodically. We can confirm what your specific configuration qualifies for when we quote the project.

What warranty comes with the VLX 500 Sliding Window?

The VLX 500 carries a manufacturer-backed warranty through ViewLux that covers the frame, finish, hardware, and glass. Exact warranty terms depend on the product configuration and are provided in writing at purchase. Our installation at Westlight Windows Orlando is done to AAMA 2400/2410 standards so the warranty stays valid. Call us at (850) 493-7894 to get the warranty documentation for the configuration you’re considering.

Can I customize the size of the VLX 500 Sliding Window?

Yes, the VLX 500 is not a stock-size product. We order every unit to the exact opening dimensions of your Orlando home, measured by our team. That gives you full freedom on width and height within the system’s structural limits, and we’ll tell you those limits for your specific opening before you commit.

How do I maintain aluminum frames on a sliding window in Florida?

Maintenance on VLX 500 aluminum frames in Orlando is minimal. Wash the frames and glass with mild soapy water a few times a year, keep the bottom track clear of sand and debris, and lubricate the rollers annually with a dry silicone spray. The powder-coated and anodized finishes don’t require repainting or sealing. If you notice any stiffness developing, call us for a track cleaning and adjustment before it becomes a problem.

Get a Quote – VLX 500 Sliding Window in Orlando

Whether you’re replacing a single slider or ordering the VLX 500 for every opening in a new build across Orlando, the process starts with a conversation and a measurement. We’ll come to the property, take exact dimensions, review glass and finish options, and give you a written line-item quote with no surprises later.

Call Westlight Windows Orlando at (850) 493-7894 to schedule your free on-site measurement and get a fixed price for the VLX 500 Sliding Window.

Written by the team at Westlight Windows Orlando, authorized ViewLux installation partner serving Orlando, FL and surrounding Central Florida communities.