CGI Window Replacement Nationwide

CGI Window Replacement: The Orlando Owner’s Guide

CGI window replacement in Orlando typically runs $850 to $2,400 per window installed, depending on the series, size, and whether you need impact-rated glass matched to the original. We stock CGI-compatible sashes, balances, rollers, and hardware on our trucks, and most single-window swaps are done the same day we’re on site. The way most owners find us: a window that’s suddenly hard to lift, a sash that drops when you let go, or a corner that’s started letting afternoon rain in through a hazy, failed seal.

Call (850) 493-7894

Which CGI Models This Applies To

CGI produces impact-rated window systems built for Florida’s wind and rain load, and the replacement path depends on which series you have. The most common lines we see in Orlando homes are Sentinel (CGI’s flagship impact casement and single-hung), Estate Collection (a mid-range vinyl impact line), and Targa (CGI’s value-priced impact series often spec’d in tract-built communities like Avalon Park and Waterford Lakes). Each series uses different balance systems and sash profiles, which means a balance from a Sentinel won’t drop into a Targa frame without modification.

Here’s the identifier that saves you time: look for the AAMA certification sticker on the top edge of the sash or the frame’s interior track. It carries the series name, the size code, and the manufacturing date. Measure the visible glass height and width to the nearest 1/8 inch and take a photo of that sticker before calling us. We’ll match against CGI’s sizing charts on our end. For hardware like locks and operators, CGI parts are generally only available through authorized channels as OEM components. We install genuine CGI hardware, and for balances and weatherstripping we’ll walk you through when a quality aftermarket equivalent makes sense and when it doesn’t.

Signs Your CGI Window Replacement Is Failing

Most CGI windows in Orlando fail in predictable ways, and each symptom points to a specific part. Here’s what we see in the field:

• The sash drops or slams shut when you let go. That’s a failed balance system. CGI uses block-and-tackle or spiral balances depending on series and sash weight, and Orlando humidity accelerates spring corrosion inside the balance tube.
• Condensation between the glass panes. The seal has failed and the argon or krypton fill has escaped. In Florida’s heat, that seal doesn’t fail gracefully. You’ll see fog that comes and goes with the morning dew point, and eventually a permanent haze.
• The lock or latch no longer engages. CGI’s multipoint locking systems on impact windows take a beating from daily use and salt air if you’re near Lake Conway or the Conway chain. The keeper alignment drifts or the gear mechanism binds, and the window won’t seal tight.
• Rollers that grind or stick when sliding. Common on CGI horizontal sliders in Dr. Phillips and Windermere homes. Sand and fine debris work into the roller bearings, and once they flatten, the sash drags metal on metal in the track.
• Water weeping in at the bottom corners after heavy rain. Not always the window itself. The weep holes in a CGI frame are sized to drain water from the track, and when clogged with pollen or debris, water backs up and finds its way inside. But if the weep system is clean and water’s still entering during a driving storm, you may have a failing seal or a frame that’s settled out of square.

Replacement Cost & What’s Included

What you’ll pay in Orlando depends mostly on whether you’re replacing the full window unit or a single component. Here’s the range we quote most often:

• Balance replacement (one sash): $165 – $320 installed, parts included
• Roller and track service (per panel): $120 – $240 installed
• Lock/hardware replacement: $85 – $230 installed, depending on multipoint vs single-point
• Full sash replacement (glass + frame inserts): $480 – $1,100 installed, depends on series and glass package
• Complete window unit replacement (CGI Sentinel or Targa): $850 – $2,400 installed, per window, depending on size, series, and impact-rating load

Every quote is written before any work starts, and that price doesn’t move at the door. It includes parts, labor, haul-away of the old unit when applicable, and our written workmanship warranty. If a repair fails inside the guarantee period, we come back and correct it at no charge. That’s the Kingswell Guarantee, and it applies to every job we do in Orlando.

DIY or Call Us?

If your CGI window is stuck, first check that the lock is fully open and that nothing’s wedged in the track. That’s safe and worth doing. But once you’re looking at a failed balance, a shattered roller, or a fogged impact-rated sash, the job stops being straightforward. A loaded balance under tension can snap back hard enough to take off a fingertip. An impact-rated sash is heavy, and dropping one means a cracked tile floor or a broken toe, not just a dented window.

More than that, the reason owners call us is the match. Getting the wrong balance rating for a CGI Sentinel sash means the window still won’t stay up. Getting the wrong lock means the window won’t seal against a summer storm. That’s the kind of outcome that only costs more later. If you want it done once, call (850) 493-7894 and we’ll send someone who knows CGI windows by the feel of the frame. Owen Satterfield has walked more than a few of these routes across Dr. Phillips and understands the difference between a quick fix and a lasting one.

FAQs