New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Horizontal Roller Windows in Orlando, FL
Horizontal roller windows are the glass panels that slide side to side on a track instead of cranking out or lifting up. In Orlando, they show up most often in mid-century ranch homes, pool enclosures, and porch-to-sunroom conversions where you want a wide opening, easy one-handed operation, and a clear view that doesn’t tilt into your walkway. At Westlight Windows Orlando, our Window Installation Near Me in Orlando, FL includes horizontal roller windows from manufacturer lines including CWS, ES Windows, and ECO Window Systems, and every job gets the same five promises that define The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.
If you’re replacing old rollers in a 1960s Conway or Audubon Park home, or you’re building out a lanai in Dr. Phillips and need glass that won’t warp in humidity, call us at (850) 493-7894. A real person picks up, day or night. For the bigger picture on how roller windows fit into a whole-home project, see our Window Installation page.
When You Need Horizontal Roller Windows
Most Orlando homeowners don’t wake up thinking about roller windows. They notice the symptoms first. Here’s what brings people to us:
- The track sticks or grinds. Florida humidity swells frames, and years of dust mixed with rain residue turns a smooth glide into a two-handed shove. In lake-adjacent neighborhoods like College Park or Baldwin Park, we see this constantly.
- The rollers have cratered. Nylon rollers from the 1980s and 1990s wear flat, and the sash starts dragging metal on metal. You’ll hear it before you see it.
- Condensation between the panes. When the seal fails on a double-pane roller, fog builds inside the glass and you can’t wipe it away. That’s not a cleaning problem, it’s a failed insulated glass unit.
- You’re converting a porch or patio. In MetroWest, Winter Park, and Oviedo, we install roller windows in enclosed lanais where the wall runs long and you want sliding panels rather than crank-outs that swing into the walkway.
- Air leaks you can feel. Run your hand along the frame edge on a July afternoon. If you feel warm air bleeding through, the weatherstripping or the frame itself has deteriorated.
- You want impact-rated glass on a wide opening. For homes in Windborne or areas closer to the coast, a horizontal roller with impact-rated glass from ES Windows or CWS gives you a wide opening without needing a column in the middle.
If any of these sound like your house, the fix is usually not a “lube and tighten” patch job. The fix is replacement, done right once. That’s what we do.
Our Horizontal Roller Windows Process
Here’s how a roller window project goes with Westlight Windows Orlando, start to finish:
- You call and talk to a live person. Not a voicemail box, not an answering service that promises a callback. Someone at (850) 493-7894 answers, schedules your visit, and notes everything you told us so the estimator arrives already knowing your project.
- We measure, inspect, and show you product in person. We look at the existing frames, check the wall opening for square, and walk you through roller window options from CWS, ES Windows, and ECO Window Systems. You see the actual frame profiles and glass samples, not a brochure.
- You get a written price before any work starts. The Kingswell Guarantee requires it. The number on that quote is the number you pay, period. No revised invoice at the door, no “we found rot once we got inside” surprises.
- Our installers replace the window, in the arrival window we gave. Background-checked, uniformed technicians handle the full removal, installation, and finishing. We protect the floor around the work area and haul away the old sashes and frame.
- We clean up and hand you a written guarantee. The site is left cleaner than we found it, the glass is wiped down, and you get the 365-Day Done Right Promise in writing. If anything isn’t right within that year, we return and fix it at no charge.
- If a repair ever fails, the second visit is free. No negotiating, no fine print. It’s automatic. That’s how we’ve done it since Owen Satterfield started this Westlight location in 2009 as part of the Kingswell network of independently owned and operated locations.
Horizontal Roller Windows Pricing in Orlando
Horizontal roller window replacement in Orlando typically runs $550 to $1,400 per window installed, depending on size, glass package, and frame material. Here’s a practical breakdown so you know what to expect before you even pick up the phone:
- Standard aluminum-frame roller, single pane, up to 48″ wide: $550 to $800 installed
- Standard aluminum-frame roller, double pane, up to 60″ wide: $700 to $950 installed
- Vinyl-frame double-pane roller, common lanai sizes: $650 to $1,050 installed
- Impact-rated roller window (CWS or ES Windows), up to 72″ wide: $950 to $1,400 installed
- Low-e glass upgrade (a thin coating that reflects heat back out of the room in summer): adds $90 to $180 per window
- Full-frame replacement with trim work and sill repair: adds $150 to $350 per opening
What moves the number? Three things mainly:
- Glass package. A basic clear double-pane costs less than low-e glass. Impact-rated glass from CWS or ES Windows costs more, but it’s the right call for wide openings and storm-exposure walls.
- Opening size. Roller windows scale wide. A 72-inch slider costs more than a 36-inch slider, not because the labor changes much, but because the glass and frame have to be engineered for that span.
- Frame condition. If the original frame is square and structurally sound, we can often do an insert replacement. If it’s rotted, racked, or full of old silicone smeared over leaks, we’ll recommend a full-frame replacement and show you why.
Every estimate from Westlight is free, and the price is handed to you in writing before you make any decision. Call (850) 493-7894 and we’ll get you a real number, not a range that shifts after we leave your driveway.
Why Roller Windows Work So Well in Orlando’s Climate
Orlando doesn’t just test windows. It interrogates them. Nine months of combined heat and humidity, afternoon thunderstorms that arrive out of nowhere in the wet season, and the occasional cold snap in January that makes a single-pane roller feel like an open doorway. A horizontal roller window done right has to handle all three.
The biggest failure we see in older Orlando rollers is frame warping. Aluminum frames from the 1980s and 1990s were often installed with minimal thermal breaks, so the frame skin heats and cools at a different rate than the interior rail. Add in humidity-softened wood framing around the opening, and you get a track that’s no longer parallel. The sash binds, the roller wheels chew into the rail, and eventually the window becomes a permanent part of the wall. We replace a lot of those in Pine Hills, Maitland, and the neighborhoods around Lake Underhill.
The other climate factor is condensation. When a double-pane roller loses its seal, moist Orlando air gets pulled between the panes and then condenses on the glass when the air conditioning drops the interior temperature. That fog is permanent damage to the insulated glass unit itself. The window still looks like a window, but its insulation value has dropped to roughly single-pane performance. In a climate where you’re running AC eight months a year, that’s money bleeding out through the glass.
That’s why we recommend low-e glass on almost every roller we install in Orlando. The coating reflects solar heat back outside during the long summer, and it keeps conditioned air from escaping in the brief winter. It costs a little more up front, and it earns that cost back in lower energy bills over the life of the window.
What We Install: Roller Windows From CWS, ES Windows, and ECO Window Systems
Westlight Windows Orlando carries eight manufacturer lines, and for horizontal rollers we typically recommend three of them: CWS, ES Windows, and ECO Window Systems. Each solves a different problem.
CWS makes some of the widest-spanning roller windows in our lineup. If you’re replacing a bank of three 60-inch sliders with panoramic glass, CWS is the first line we look at. Their impact-rated configurations are a strong option for Sunset Park and Audubon Park homes that want uninterrupted sightlines without giving up storm protection.
ES Windows builds rollers with a slimmer frame profile than most aluminum lines, which means more glass area and less metal. For homeowners in College Park or Thornton Park who love the look of their original mid-century aluminum windows but want modern thermal performance, ES lets us keep that aesthetic without the energy penalty.
ECO Window Systems focuses on energy performance per dollar. Their low-e and argon-filled configurations hit efficiency numbers that make a real difference on a west-facing wall in Orlando, where the late-afternoon sun (the same west light that gave our company its name) beats through the glass from March to November. When you’re on a budget but you don’t want to sacrifice the insulation value, ECO gets the call.
We match the product to the job, not the other way around. You’ll see samples and cut sheets at the estimate, and Owen Satterfield will tell you straight which line makes sense for your house and which ones don’t.
Roller Window vs. Sliding Window: What’s the Difference?
They’re the same window. “Horizontal roller” and “slider” are two names for the same thing in this part of Florida. Some companies say “sliding window,” some say “roller window,” some write “horizontal rolling window” on a bid just because it sounds more technical. If there’s any real distinction, it’s historical: older homes built before 1980 often have single-pane rollers with exposed metal tracks, while newer sliders use vinyl or thermally broken aluminum with concealed hardware. The function is the same: the sash rides on a track and slides horizontally to open. If you’re also considering Picture & Fixed Windows or other styles, the same installation principles apply.
What’s not the same is quality. A budget roller from a big-box store will glide for about two years in Orlando humidity before the wheels start grinding. A CWS or ES Windows roller installed square, on a reinforced track spacer, with proper weep-hole drainage, will slide with two fingers for fifteen years or more. We’ve replaced enough cheap ones to know the difference, and we’ve seen enough seals fail on six-month-old installations (not ours, but we get called in to fix them) to understand why a homeowner who’s been burned once is skeptical of everyone after that.
Key Takeaways
- Horizontal roller windows in Orlando typically cost $550 to $1,400 per window installed, depending on size, glass, and frame condition.
- The most common call we get is for sticking tracks and worn rollers in homes built between 1960 and 1995 across Conway, College Park, and Maitland.
- We install roller windows from CWS, ES Windows, and ECO Window Systems, and we’ll show you the actual product at the estimate, not a picture.
- Every job includes a written price before work starts, a committed arrival window, a clean site, and the 365-Day Done Right Promise in writing.
- Call (850) 493-7894 and a live person answers, 24/7. Your estimate is free.
FAQs – Horizontal Roller Windows
How much does it cost to replace a horizontal roller window in Orlando?
A horizontal roller window replacement in Orlando typically costs $550 to $1,400 installed, with the most common size and glass package landing in the $700 to $950 range. Impact-rated glass from CWS or ES Windows adds cost, as does a full-frame replacement. Every Westlight estimate is free and in writing before you commit. Call (850) 493-7894 for an exact quote on your window.
Can you fix a sticking roller window instead of replacing it?
Sometimes, yes. If the track is just dirty and the rollers are intact, a cleaning and track adjustment can restore the glide. But if the rollers have flat spots, the frame has warped from Orlando humidity, or the seal between the panes has failed, fixing it is throwing money at a window that’s already done. We’ll tell you which situation you’re in at the estimate, and we won’t sell a replacement when a repair does the job.
Are horizontal roller windows good for Florida weather?
They are, if they’re the right product. A low-e double-pane roller from CWS, ES Windows, or ECO Window Systems handles Orlando heat and humidity well, and impact-rated configurations cover you for wind-driven debris. The key is a square installation with proper drainage and a frame that won’t warp. That’s not a product issue, it’s an installation issue, and it’s why we put every detail in writing before the work starts. The same care applies if you later add Single & Double Hung Windows to other rooms.
How long does it take to install a horizontal roller window?
Most single roller window replacements take two to four hours from removal to final caulk and cleanup. A bank of three matching rollers or a full-frame replacement with sill work might run a full day. We give you a committed arrival window before the job, and we show up in it.
Do you offer impact-rated horizontal roller windows?
Yes. We install impact-rated roller windows from CWS and ES Windows for homeowners in Orlando and the surrounding areas who want a wide sliding opening with storm protection. Impact-rated glass affects the price, but for west-facing walls and full-wall lanai conversions, it’s often the right investment. Call (850) 493-7894 and we’ll price it both ways so you can decide with real numbers.
Call Westlight Windows Orlando for Your Free Estimate
If your roller windows stick, fog, leak, or you’re simply tired of fighting with them, call Westlight Windows Orlando at (850) 493-7894. You’ll reach a live person, not a machine. We’ll schedule your free estimate, show you roller window options from CWS, ES Windows, and ECO Window Systems, and put a written price in your hand before you spend a dollar. Owen Satterfield and the Westlight team have served Orlando since 2009, and every job comes with the Kingswell Guarantee: the price stays the price, we show up when we said, the site is left clean, and if the work fails within the guarantee period, we come back and fix it at no charge. That’s the whole promise. It’s in writing, and it’s been that way since the first window we hung.
Written by Owen Satterfield, Owner at Westlight Windows Orlando, serving Orlando.
Six Reasons Homeowners Choose Westlight Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.