VLX 100 Pivot Door

VLX 100 Pivot Door in Orlando, FL | Westlight Windows Orlando

The VLX 100 Pivot Door is a heavy-duty aluminum entry system that rotates on a vertical center axis instead of traditional side hinges. It’s the kind of door that stops people mid-conversation the first time they see it. Westlight Windows Orlando installs this ViewLux-manufactured door throughout the Orlando metro area for homeowners who want an oversized glass statement piece that can withstand Florida’s summer heat, afternoon thunderstorms, and wind-driven rain without warping, sticking, or leaking. Call (850) 493-7894 to talk about your opening.

Call (850) 493-7894

Product Overview – VLX 100 Pivot Door

Pivot doors are a different animal from conventional hinged entries. Instead of the weight hanging off two or three side hinges screwed into the jamb, the entire door panel rotates on a vertical axis point set into the floor and header. This means the VLX 100 can carry glass panels and frame sections far too heavy for a standard hinge system, up to a span of 60 inches wide by 120 inches tall. It’s an architectural statement as much as it is a functional door.

The frame is extruded aluminum with a wall thickness of 0.098 inches and a profile width of 2.56 inches. That’s a substantial cross-section, and it’s why this door doesn’t flex when it’s closed or flutter when the wind picks up. The center-axis pivot carries that weight cleanly, so the door swings open with a light push even at maximum dimensions. Builders and architects in communities like Winter Park, Baldwin Park, Lake Nona, and Dr. Phillips rely on this series when the design calls for a grand entry that regular French doors or sliding glass systems simply can’t deliver.

What makes the VLX 100 work in Orlando isn’t just the dramatic look. It’s the thermal break built into the aluminum profile. Untreated aluminum is a terrible insulator in a subtropical climate. A solid metal frame bakes in the afternoon sun, transfers heat right into your foyer, and sweats condensation when air-conditioned air hits it. The thermal break in the VLX 100 interrupts that heat path, keeping the interior side of the frame close to room temperature even when the exterior is hot to the touch. If you’re looking at a pivot door for an Orlando home, this matters more than any finish option.

The glass is the other half of the story. The oversized glass panel can be specified in clear, frosted, obscure, Low-E, tempered, or laminated configurations. We’ll go deeper into those options below, but the short version is this: whatever privacy, energy, or impact rating your project needs, the VLX 100 can be built to meet it.

Technical Specifications

Here’s the full rundown on what the VLX 100 brings to the table. These numbers matter more than most people realize. A pivot door spans a wider opening than a standard entry door, which means every millimeter of frame thickness and every glass spec has to earn its place.

• Frame material: Extruded aluminum, thermally broken
• Profile wall thickness: 0.098 inches
• Profile width: 2.56 inches
• Maximum panel size: Up to 60 inches wide × 120 inches tall
• Pivot mechanism: Vertical center-axis floor and header pivot points
• Glass types: Clear, Frosted, Obscure, Low-E, Tempered, Laminated
• Frame finishes: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Performance compliance: AAMA 2400/2410 installation standard, AAMA 812 sealant protocol
• Energy rating: NFRC-rated with thermal break technology
• Impact option: Laminated impact-resistant glass for wind-borne debris zones

One note on the span: a 60 by 120 inch panel is a legitimate statement piece. That’s roughly five feet wide and ten feet tall. At that size, the frame engineering and the installation have to be precise to within an eighth of an inch, which is exactly why Westlight Windows Orlando takes each installation through a measured, AAMA-compliant process rather than treating it like a standard door swap.

Performance Features

Thermal Efficiency. The VLX 100 uses a thermal break inside the aluminum frame to interrupt heat transfer between the exterior and interior faces. With Low-E glass, the assembly carries an NFRC-rated energy performance that holds up in Orlando’s nearly year-round cooling season. You’ll feel the difference on the door handle in August.

Acoustic Performance. Oversized glass doesn’t have to mean oversharing every sound from the street. A laminated glass upgrade adds a damping layer inside the glass sandwich that noticeably reduces traffic noise, lawn equipment, and the general sound of living in a busy Orlando subdivision.

Airtightness & Weather Seal. Every perimeter joint gets treated with AAMA 812 low-expansion foam sealant during installation. That’s the standard that keeps unconditioned, humid outside air from sneaking around the frame into your air-conditioned interior. The gaskets do their job, and the foam sealant does the rest.

Waterproofing. Florida is a rain state. The VLX 100’s compression gaskets and sill design keep water moving down and away, not in. Combined with the AAMA 2400/2410 installation method we follow, the waterproofing is tested before we pack up our tools. A pivot door that leaks is a pivot door that was either built wrong or installed wrong.

Wind Resistance. This door is wind-load rated for local climate requirements, including Orlando’s hurricane-season conditions. If your home is in a wind-borne debris zone, the laminated impact glass option gives you a code-compliant or beyond-code assembly that stands up to flying branches and pressure swings.

Security & Hardware. The pivot mechanism distributes the door’s weight across both floor and header points. That gives you a level of structural stiffness a standard door hinge can’t match. Laminated glass adds another layer of protection: even if the outer pane fractures, the inner interlayer holds the panel together and keeps the building envelope sealed.

Color & Glass Options

Premier Black is the finish most often specified for modern Orlando homes in neighborhoods like College Park or downtown’s Thornton Park, where monochrome facades and white stucco work together. It reads sharp against light-colored walls. Pure White suits the coastal-inspired and transitional homes around Lake Eola and in Conway. It blends with trim, drawing attention toward the glass instead of the frame.

Anodized Silver has that raw-metal look that pairs well with polished concrete or contemporary flat-roof architecture. Bronze is the choice when you want warmth without going full brown, and it ages gracefully with Mediterranean or Spanish-revival homes throughout the Orlando area. Champagne is a limited spec that reads as a warm neutral with a slight golden cast, working especially well on estate homes in neighborhoods like Windermere. Teak Wood is an aluminum frame with a wood-grain finish, built for buyers who want a timber look without rot, termites, or refinishing in a Florida climate.

For glass: Clear maximizes the view and the light. Frosted and Obscure are for when the door opens to a street-facing lot and you don’t want every passerby seeing into your living room. Low-E cuts heat gain while keeping sightlines clear. Tempered glass is a safety-glass requirement on a door this size, and it’s standard where needed. Laminated is what you want for impact resistance and noise control, and it’s the option we recommend most often for Orlando projects that face west or north wind exposure.

Installation by Westlight Windows Orlando in Orlando

Here’s what separates a beautifully functioning pivot door from an expensive mistake: the installation. This isn’t a standard door replacement. A pivot panel’s weight, the precision of its swing path, and the performance of its seals all come down to how carefully it’s set into the rough opening.

Westlight Windows Orlando starts every VLX 100 installation with a pre-install inspection of the rough opening. We check the opening dimensions in three places vertically and horizontally, confirm the floor is level enough for a pivot system to set accurately, and inspect the header and subsill for structural adequacy. Any opening more than a quarter inch out of square needs correction before the aluminum frame goes in.

From there, the door is set level, plumb, and square. We don’t shim our way to “close enough” because a pivot door has no margin for error. If the panel is even slightly off-axis, you’ll feel it in the swing, the misalignment grows over time, and the seals fail prematurely. The pivot points are anchored and adjusted, the panel is hung, and the door is tested through its full swing arc to confirm even clearance along the entire path.

Once the door is seated correctly, every perimeter joint gets AAMA 812 low-expansion foam sealant. Low-expansion is important. Standard expanding foams can deform an aluminum frame as they cure. The AAMA 812 rated material fills the cavity, stops air movement, and stays flexible enough to move through Florida’s summer-to-winter temperature swings without cracking.

The entire installation follows AAMA 2400/2410 installation standards, the industry benchmark for fenestration products in commercial and high-end residential installations. After sealing, we run a water test on the sill and lower corners to verify no leaks before finishing interior and exterior trim. We clean the job site and walk through the operation, the hardware, and the maintenance schedule with you before we leave.

One hard truth about pivots doors: the manufacturer’s warranty is void if the door is installed incorrectly. That’s the risk of going with a general handyman or a cut-rate installer. Westlight Windows Orlando installs per the standards ViewLux expects, which means your warranty holds, your seals perform, and your door opens smoothly ten years from now. In a climate like Orlando’s, with its humidity cycles and afternoon storm patterns, a correctly sealed and set pivot is the entire game.

If the project involves structural changes to the opening, we coordinate with your contractor or engineer ahead of time. Orlando and Orange County permit requirements change based on the opening size, wind zone, and whether the wall is load-bearing, and we’d rather get the plan right before the opening is cut than fix it after.

Frequently Asked Questions – VLX 100 Pivot Door

Get a Quote – VLX 100 Pivot Door in Orlando

The VLX 100 Pivot Door is a serious investment in your home’s entry experience, and it deserves a measured, professional installation. Westlight Windows Orlando is the authorized ViewLux partner serving Orlando, FL with AAMA-compliant installs and free on-site measurements. Call (850) 493-7894 to start your quote or schedule a measurement at your home today.

Written by the team at Westlight Windows Orlando, serving Orlando, FL with premium door and window installations.