New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Door Installation: The Orlando Owner’s Guide
Most CWS door installation work in Orlando runs between $450 and $1,850 installed, depending on whether we’re replacing hardware, re-hanging a slab, or pulling the entire frame. We stock CWS-compatible parts on the truck, and the majority of repair visits are finished in a single trip. The typical call starts the same way: the door still looks fine from across the room, but it drags, sticks, or lets a sliver of daylight through the weatherstripping that wasn’t there last spring. What you’re noticing is the door’s installation system wearing out, not the door panel itself. In Orlando’s heat and humidity, the frame, hinges, and threshold take a beating faster than most other parts of the opening.
Which CWS Models This Applies To
CWS builds swing doors, sliding glass doors, and impact-rated entry systems, and the installation components are not always interchangeable across those lines. A hinge set from a standard CWS swinging door will not fit a CWS impact-rated door, which uses a heavier extruded frame and different hardware geometry. The fastest way to identify what you need is the label on the door’s edge or top rail, which lists the series code and manufacturing date. If the label has faded or worn off, our technicians measure the hinge pattern, slab thickness, and frame depth on site to match the correct parts.
On the OEM-versus-aftermarket question: for CWS doors, we generally recommend factory or factory-equivalent parts when the door is impact-rated, because the mounting points and tolerances are engineered as a system. For standard, non-impact CWS doors, we carry quality aftermarket hinges, rollers, and weatherstripping that meet or exceed the original specs and often cost 20 to 30 percent less. We’ll tell you which path makes sense for your specific door before any work is approved, in writing, with the price attached.
Signs Your CWS Door Installation Is Failing
- The door scrapes or drags near the latch side. This usually means the top hinge has loosened or the frame has shifted slightly out of square, a common issue in Orlando homes where soils expand and contract with the wet and dry seasons.
- You feel a draft or see daylight around the door’s edges. The weatherstripping has compressed or the threshold has settled, allowing conditioned air to escape. It’s not just comfort, it’s your air conditioning bill climbing every month.
- The door won’t latch without lifting or pulling the handle. The striker plate has moved, or the slab itself has sagged on worn hinges. Forcing the latch only makes the underlying problem worse.
- Condensation fogs the glass or weeps appear along the bottom rail. On CWS doors with insulated glass, a failed seal lets moisture into the unit, and once the seal is gone, the glass can’t be resealed, only replaced.
- The sliding door jumps the track or grinds when you open it. The rollers are worn, or the track has debris packed into it. Ignoring a grinding slider usually ends with a door off its track and a panel that’s difficult or unsafe to remount alone.
Replacement Cost & What’s Included
In Orlando, hardware-only replacements on CWS doors, meaning hinges, handles, striker plates, or rollers, typically run $450 to $850 installed. A full re-hang, where we remove the slab, repair or replace the frame components, and reset everything square, lands between $850 and $1,450. A complete CWS door system replacement, including new frame and slab, starts around $1,250 and tops out near $1,850 for larger or impact-rated openings. The range depends on the door’s size, whether it’s impact-rated, and whether the frame itself needs rebuilding or just adjustment.
Every quote includes the parts, labor, disposal of the old components, and a written guarantee on the work. You get the price before any work starts, per the Kingswell Guarantee, and it does not change at the door. If the repair fails within the guarantee period, we come back and fix it at no charge. That’s not a verbal promise, it’s in writing, handed to you at the end of the job.
DIY or Call Us?
Some things you can check yourself without risk: loose hinge screws are visible and often just need tightening, and a sticky slider can sometimes be helped by cleaning the track. But door installation problems that involve the frame, the threshold, or an impact-rated panel are not safe DIY projects. Impact-rated CWS doors are heavy, often over 150 pounds for the slab alone, and they’re under tension at the hinges. A door that slips while you’re working on it can break bones or smash glass. When the frame has shifted, no amount of hinge tweaking fixes the root cause.
If the door is sagging, latching poorly, or off its track, call us at (850) 493-7894. We’ll give you a real price, in writing, before any work begins, and we’ll show up in the window we gave you. That’s the whole job, start to finish.
FAQs
A properly installed CWS door system in Orlando should last 15 to 20 years, but hardware components like rollers, hinges, and weatherstripping typically need replacement every 7 to 10 years because of Florida’s heat, humidity, and daily use. Impact-rated doors tend to hold their frame tolerances longer than standard units, but any door facing direct afternoon sun on the west side of an Orlando home will need weatherstripping and hardware attention sooner. Call (850) 493-7894 for an exact assessment of your door’s condition, and we’ll tell you what’s wearing and what’s still solid.
Yes, in most cases we repair rather than replace. Hinges, rollers, striker plates, thresholds, and weatherstripping are all serviceable components that we carry on the truck and can replace in a single visit. Full replacement only makes sense when the frame itself has rotted, split, or shifted so far out of square that repair would be a bandage rather than a fix. We’ll show you what’s wrong and give you the repair price before recommending anything bigger. Call (850) 493-7894 to schedule a free estimate.
Hardware repairs like hinges, rollers, or weatherstripping on a CWS door take one to two hours on site, and most customers are done with us the same day they call. A full re-hang or frame rebuild takes longer, usually half a day, and a complete door system replacement takes one full day. We commit to a real arrival window in writing before we come out, and we hold to it. Call (850) 493-7894 and we’ll give you a straight time estimate for your specific door.
We stock the most common CWS-compatible parts on our trucks: hinges, roller assemblies, striker plates, weatherstripping, and threshold components for the standard and impact-rated CWS lines. For less common parts, like specific frame extrusions or unusual hinge patterns, we source them from our suppliers and typically have them within a few days. We’re an independent service provider and not affiliated with CWS, but we work with their products regularly, alongside PGT, CGI, and ES Windows. Call (850) 493-7894 and we’ll check the truck for your part before we even schedule the visit.
If your CWS door is dragging, sticking, or letting outdoor air into your Orlando home, the fix is probably simpler than you think, and the price should be known before the work starts. We’ve been doing this since 2009, and Owen Satterfield has built our Orlando crew around a simple rule: measure twice, quote straight, and don’t disappear after the check clears. A window should work so well you forget it’s there, and the same goes for the door you walk through every day. Call Westlight Windows Orlando at (850) 493-7894 for your free estimate.
Written by Owen Satterfield, Owner, Westlight Windows Orlando at Westlight Windows Orlando, serving Orlando and nearby areas.
Six Reasons Homeowners Choose Westlight Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.