New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Impact Garage Doors: The Orlando Owner’s Guide
CGI impact garage doors in Orlando typically run $4,800 to $9,200 installed, and we stock the full CGI-compatible lineup on our trucks so most replacements happen same-week. The most common call we get starts with the same sentence: the door won’t go up, or it started making a sound like a bag of gravel. In most Orlando homes, the failure isn’t the door itself, it’s the hardware the door depends on, springs, rollers, cables, or the opener bracket, and CGI doors are heavy enough that when those parts let go, the whole system needs attention fast.
We’re an independent Orlando installer, not a CGI factory affiliate, so our loyalty is to your house, not a brand rep’s quota. That said, we stock and install CGI because Florida building code is not a suggestion, and a door engineered for Miami-Dade wind loads is the right tool for Orange County. Owen Satterfield, our owner, has pulled enough failed hardware off Central Florida garage ceilings to know the difference between a door that’s worn out and one that was installed wrong from day one.
Which CGI Models This Applies To
CGI manufactures impact garage doors across three main series: Estate Collection single and double doors, Mediterranean panel profiles, and the heavier-duty Sovereign line rated for the highest wind zones. Each series uses different panel thicknesses, typically 1-3/8″ to 2″ insulated steel or aluminum, and the hardware kits differ accordingly. Before we quote a single dollar, we match the hardware to the actual door on the track, not the brand name on the panel. A CGI Sovereign double door may weigh 300 pounds more than an Estate single, and a spring kit sized for the lighter door will fail within months on the heavier one.
To identify your exact model, look for the CGI compliance sticker on the inside edge of the bottom panel or the top section. It lists the series, the wind-load rating, and often the Miami-Dade NOA number. If the sticker is gone, we measure the panel thickness, the track radius, and the overall door weight, then match to CGI’s current spec sheets. When it comes to replacement hardware, we install OEM CGI components when the door is still under its structural warranty, but honest aftermarket springs, cables, and rollers from established manufacturers often outlast the originals here in Orlando humidity, because the OEM spring steel was not coated for our salt air and afternoon storms. We’ll show you both options with pricing and let the numbers do the talking.
Signs Your CGI Impact Garage Doors Is Failing
- Door opens a few inches, then stops or reverses. This usually points to a broken torsion spring or a failing safety sensor. On a CGI door weighing 250-plus pounds, a broken spring means the opener motor is suddenly handling dead weight it was never rated for, and continuing to run it will strip the opener gear within a week.
- Loud snap or bang from above the door, then the door won’t move. That’s almost always a torsion spring letting go. It sounds like a gunshot in the garage. When that happens, close the door manually if you can, but do not run the opener, the unbalanced door will tear the top panel or bend the track.
- Door creeps down after opening, or drops the last few inches hard. Cables are losing tension or the springs are fatigued. What you’re hearing is the door telling you the balance is off, and every cycle that imbalance worsens wears the rollers and hinges unevenly.
- Visible rust or corrosion on the bottom panel or track brackets. Orlando’s humidity and occasional hurricane-driven salt spray accelerate rust on unprotected steel. A corroded bottom bracket can shear under load, dropping one side of the door without warning.
- Door shakes or shudders while moving, even on a new opener. This is usually worn rollers or a bent track, not the opener. CGI doors are heavy enough that even minor track misalignment causes amplified vibration, which shortens the life of every other component.
Replacement Cost & What’s Included
Here’s what we’re seeing across Orlando in the current market, for a standard single CGI impact garage door, hardware included, installed by our crew:
| Job Scope | Typical Installed Price |
|---|---|
| Single CGI impact door, Estate or Mediterranean, replacing existing | $4,800 – $6,700 |
| Double CGI impact door, Estate or Mediterranean | $7,000 – $9,200 |
| Sovereign high-wind-rated series, single | $6,200 – $8,000 |
| Spring/cable/hardware kit replacement only, most CGI models | $380 – $650 |
| Roller replacement, full set, nylon ball-bearing | $180 – $290 |
The spread comes down to panel thickness, insulation option, window inserts if any, and whether your existing track can be reused or needs replacement. You get a written price before we touch a screw, which is the whole point of the Kingswell Guarantee. If the number changes at the door, you don’t pay the difference. Our labor is warrantied for a full year, and the springs and rollers carry their manufacturer warranties we’ll file the paperwork for you. Every CGI part we install in Orlando is matched to the door’s weight and wind rating, because a spring kit that’s “close enough” is the one that fails in August when the humidity is at its worst.
DIY or Call Us?
Here’s the honest split. You can safely check the basics: are the safety sensors aligned and unobstructed, is the opener force setting adjusted, is there obvious debris in the track. But when it comes to torsion springs, cables under tension, or any hardware that holds a 300-pound door overhead, do not touch it. Those springs are wound under enough force to break bone or worse if mishandled. We’ve been called out to more than one Orlando garage where a well-meaning homeowner tried a spring swap, and the repair bill tripled because the door came off the track and damaged the panel.
If the concern is a worn roller, a frayed cable, or a spring that’s visibly sagging (we can walk you through what to look for over the phone), call us at (850) 493-7894. We’ll give you a straight answer about whether it needs our crew or just a watchful eye, and the estimate is free.
FAQs
Most CGI springs are rated for 10,000 cycles, which in a typical Orlando household translates to between 7 and 10 years, but our heat and humidity can shorten that to 5 or 6 years if the springs are not lubricated annually. Call (850) 493-7894 and we’ll inspect your spring cycle count during the estimate.
Some components can, worn rollers and hinges are inexpensive replacements, and a frozen opener carriage can sometimes be reconditioned. But a snapped torsion spring, a frayed cable, or a bent track leg is a replacement job, full stop, and running the door even once on a broken spring will cause more damage. We’ll tell you which category yours falls into before any work begins.
A single-door replacement with hardware typically takes one full day, including removing the old door, setting the new track, balancing the springs, and cleaning up. Double doors or jobs requiring a new opener run into the next morning. We’ll give you a committed arrival window when you schedule, not a four-hour range.
Yes, we carry the most common CGI-compatible springs, rollers, cables, and brackets on our Orlando trucks, and anything non-stocked arrives from our suppliers within 48 hours in most cases. Call (850) 493-7894 and we’ll tell you straight whether we have your part before we even schedule the visit.
If your CGI garage door is acting up in Orlando, don’t guess at it. Call (850) 493-7894 and tell us what you’re seeing. We’ll give you an honest read, a written price before any work starts, and a schedule we actually keep.
Written by Owen Satterfield, Owner, Westlight Windows Orlando at Westlight Windows Orlando, serving Orlando and nearby areas.
Six Reasons Homeowners Choose Westlight Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.