New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Door Installation: The Orlando Owner’s Guide
PGT door installation in Orlando typically runs $450 – $1,200 installed for most roller, hinge, and track replacements, and we complete most PGT door hardware swaps in a single visit. Homeowners usually discover the part failed the hard way: a sliding glass door that suddenly drags, a French door that won’t latch, or a hinge roller that grinds every time you open it. The good news is that PGT parts are identifiable, and we stock the most common failure points on our trucks so we don’t have to order-and-wait twice.
We’re Westlight Windows Orlando, an independent installer and parts provider. We’re not affiliated with PGT directly, but we’ve been installing and servicing their doors across Orlando since 2009, and we know which components wear out first in Florida heat and humidity.
Which PGT Models This Applies To
PGT builds several door lines, and parts are not universal across them. The three you’ll find most often in Orlando homes are the WinGuard impact-rated sliding glass doors, the Spectrum sliding patio doors, and the Series 550/770 hinged French door lines. Each uses different roller assemblies, track profiles, and hinge hardware.
Here’s the compatibility gotcha we see regularly: PGT changed roller housing dimensions between production years on the WinGuard line. A roller assembly from a 2012 WinGuard will not seat properly in a 2019 frame without a shim or a different housing. If you’re ordering parts yourself, don’t go by model number alone. Look for the white PGT sticker on the door edge or jamb, which lists the series, glass package, and production date. Even better, take a photo of the sticker and the failed part and send it to us. We match parts to the production run, not just the series name.
On the OEM-versus-aftermarket question: PGT OEM rollers and hinges are solid, but they’re priced accordingly, and some have long lead times from the manufacturer. For most Orlando homeowners, a quality aftermarket roller with sealed stainless bearings performs identically and gets installed faster. We tell you which option makes sense for your specific door and budget before any work starts.
Signs Your PGT Door Installation Is Failing
- The door drags or requires a hard shove to move. This is almost always a roller bearing that’s seized or flattened. Florida grit and humidity accelerate the wear, and running a door on a dead roller for weeks will gouge the track, turning a $450 roller swap into a $1,200 track replacement.
- The door lifts up as you push it. That lift is the roller housing wearing against the track edge. It means the roller wheel has worn down unevenly or the housing has loosened. Left alone, the door eventually derails or the track lip cracks.
- A grinding or squealing noise when opening or closing. Bearing failure. Once the sealed bearing is gone, metal rides on metal. You’ll hear it before you see it.
- The door won’t stay latched or the handle feels loose. On PGT hinged doors, this is typically a worn strike plate or a latch bolt that’s drifted out of alignment from hinge sag. Hinge replacement is straightforward; ignoring the sag is what breaks the jamb over time.
- Condensation or water staining at the bottom corners. The roller housings sit inside the bottom rail, and when the weep holes clog or the bottom sweep fails, water pools in the rail. That water destroys roller bearings fast and starts corrosion on the housing screws.
Replacement Cost & What’s Included
Here’s what PGT door installation pricing looks like in the Orlando market right now, installed and with parts included:
| Repair Type | Typical Installed Price |
|---|---|
| Sliding door roller replacement (2 panels) | $450 – $650 |
| Track repair or single track section replacement | $400 – $900 |
| Full track and roller replacement | $800 – $1,200 |
| Hinged door hinge replacement (3 hinges, re-hung) | $350 – $550 |
| Latch, strike plate, and handle set replacement | $250 – $450 |
| Bottom sweep and weather seal replacement | $150 – $300 |
The range depends on whether we’re replacing just the rollers or the track too, and whether your PGT door is the impact-rated WinGuard line (heavier panels, beefier hardware) or a standard Spectrum. You get a written price before we touch a screw, and it doesn’t change at the door. The Kingswell Guarantee applies to every PGT door installation job we do in Orlando: a real arrival window, a clean job site, and a written guarantee. If the repair fails within the guarantee period, we come back and fix it at no charge. That’s not a sales line. It’s written down and handed to you.
DIY or Call Us?
You can safely inspect your PGT door without tools. Check for visible roller wear by removing the bottom rail cap on some models, or just look under the door with a flashlight. Check the track for scratches, dents, or debris. If you see a roller that’s obviously flattened or wobbling, you’ve confirmed the failure. But replacing PGT rollers and tracks is not a casual Saturday job. Sliding door panels are heavy, and PGT impact-rated panels are heavier than most. A slipped panel can throw a shoulder or crack the glass, and lifting a door out of its track without disengaging the anti-lift mechanism properly is how we see homeowners bend frames and turn a simple roller replacement into a full door replacement. If you’re anywhere near Dr. Phillips, Thornton Park, Baldwin Park, or College Park, we’ll come out, assess it, and give you a written price before any work starts. Call (850) 493-7894.
FAQs
Most PGT door rollers last 8 – 12 years in Central Florida before bearings start failing, though homes near lakes or on the coast often see failures at 6 – 8 years because of humidity and salt air. Doors that get opened every day wear faster than guest-bedroom sliders. If your PGT door is at the 10-year mark and dragging, plan on roller replacement sooner rather than later. Call (850) 493-7894 and we’ll give you an exact assessment.
Sometimes, but not on rollers. Once a sealed bearing is gone, it’s gone. Hinges can occasionally be re-tightened and adjusted, and strike plates can be re-set, but rollers and bent tracks get replaced. For an honest read on whether a repair is worth it on your specific PGT door, call (850) 493-7894 for a free estimate.
Most single-panel roller replacements and hinge re-hangs on PGT doors take 1 to 2 hours on site. Full track replacements run 3 to 4 hours depending on the frame condition. We’ll give you a specific arrival window and a specific finish time before you commit. Estimates are free, and so is the second visit if anything fails.
We stock the most common PGT roller assemblies, track sections, hinges, and sweep seals on our trucks, which is why most Orlando jobs are done in a single visit. For unusual production years or discontinued hardware, we source it through our supplier network and install it the day it arrives. We also stock compatible parts for CGI, CWS, and ES Windows doors, since Orlando homes often have mixed brands. Call (850) 493-7894 with your door’s model sticker info and we’ll tell you what we have.
If your PGT door is dragging, grinding, or not latching, call Westlight Windows Orlando at (850) 493-7894 before the track takes damage. We’ll give you a written price before any work starts, show up in the window we gave you, and stand behind the work in writing. A window should work so well you forget it’s there. So should your door.
Written by Owen Satterfield, Owner, Westlight Windows Orlando at Westlight Windows Orlando, serving Orlando and nearby areas.
Six Reasons Homeowners Choose Westlight Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.