New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Conway
Window replacement in Conway runs $850 – $2,400 per opening for most homes, with full-frame jobs on 1950s – 70s block houses landing at the higher end once you factor in structural furring and county permitting. We’re Westlight Windows Orlando, an independently owned and operated Kingswell location, and we’ve been installing windows and doors since 2009. Conway is our backyard: we know the jalousie windows on Anderson Street lakefront homes, the steel lintels in Dover Shores ranches, and the septic setbacks that complicate a detached-ADU egress window off Lake Margaret Drive. Call (850) 493-7894 and you’ll reach a live person who can schedule a free estimate, not a voicemail box.
Why Westlight Windows Orlando Is Conway’s Preferred Window Replacement Company
Conway homeowners call us because we write the price down before any work starts. No revised invoices at the door, no “we found something” conversations. That’s the Kingswell Guarantee: a written price, a committed arrival window, a clean job site, and a written guarantee on every job, handed to you when we finish. If the work fails during the guarantee period, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s been our standard since 2009.
Our technicians are background-checked and uniformed. When someone shows up at your door off Conway Road or near Barber Park, you know exactly who’s walking into your home. We don’t subcontract the work to whoever’s available. The same crew that measures your windows is the crew that installs them. That matters when you’re dealing with mid-century block construction where jamb depths vary from room to room.
Owen Satterfield runs our Orlando operation and has walked more Conway lots than he can count. He’s the one who’ll review your permit drawings and tell you plainly whether that workshop window needs a site plan review before we quote the job. Owen Satterfield doesn’t guess; he works from the Orange County setback tables.
Window Repair in Conway
Window Repair in Conway usually means one of three things: replacing failed insulated glass units that have fogged from humidity, rebuilding rotted or rusted frames on 1960s aluminum windows, or re-sealing and re-flashing windows that leak during afternoon thunderstorms. Most repair jobs on Conway homes run $180 – $550 per window, depending on whether we’re replacing glass only or pulling the frame and rebuilding the rough opening. The humid subtropical climate here is rough on seals; we see more fogged glass in Conway than almost anywhere else in Orange County.
Failed Seals and Fogged Glass
When the seal between panes fails, moisture gets in and the window turns milky. On Conway’s lakefront homes especially, the constant humidity means a failed seal never dries out on its own. We remove the old sash, measure the IGU, and order a replacement with Low-E coating that matches the original sightlines. Turnaround is typically one to two weeks for custom glass.
Aluminum Frame Corrosion
Original single-pane aluminum frames from the 1950s – 70s corrode at the corners where salt air and rain collect. If the frame is structurally sound, we can replace the glazing bead and weatherstripping, then re-seal the opening. If the frame is pitted through, we’ll tell you honestly that a full replacement is cheaper than a patch that fails again in two years.
Window Replacement Company in Conway
Window Replacement Company in Conway is a title that gets thrown around a lot, but the real difference is whether the company knows local permitting and construction. We do. A full-frame replacement on a block home off Conway Road means dealing with steel lintels, concrete masonry surrounds, and sometimes county-required structural furring. We handle the permit, the engineering, and the install, so you’re not left holding a red-tag notice from Orange County.
Full Frame vs. Insert Replacement
Inserts (also called pocket windows) fit inside the existing frame and cost less, typically $600 – $1,200 per window in Conway. Full-frame replacement removes everything down to the studs and runs $1,200 – $2,800 per opening. For older block homes with settled frames, full-frame is often the right call because it lets us flash the rough opening properly and fix the air leaks that the original installs never addressed.
Impact-Rated Retrofit for Lakefront Homes
Homes along the Conway Chain of Lakes get hit hard by wind-driven rain from afternoon storms. We regularly retrofit 1960s lakefront houses with PGT or CGI impact glass that locks down tight and meets Florida wind-mitigation standards. This usually requires a wind mitigation inspection after install, which we coordinate so your insurer actually applies the credit.
Trusted Brands We Service in Conway
We carry eight manufacturer lines, and for Conway’s mix of mid-century block homes and newer lakefront builds, we lean on a few specifically. CWS and ES Windows make excellent impact-rated products for homes near the water, where wind-load requirements are highest. ECO Window Systems offers energy-efficient Low-E glass that holds up well to our intense summer sun without the price tag of full impact. We’ll spec the right brand for your house, not the one we happen to have in the warehouse. Window Replacement with Westlight means the product matches the job, not the other way around.
Common Window Replacement Problems We See in Conway Homes
- Steel lintels that complicate jamb depth. Many 1950s and 60s block homes have steel lintels over window openings that sit tight to the rough opening. A standard double-hung window won’t fit without structural furring, which adds labor and time. We check lintel clearance at the estimate, before you sign.
- Jalousie windows that leak air and rattle in storms. Original jalousie windows on Conway lakefront homes are functionally obsolete. They don’t seal, they don’t insulate, and they don’t meet current wind code. Replacement usually means reframing the opening, not just swapping glass.
- Septic drain field setbacks on detached structures. If you’re adding an egress window to a detached garage or ADU and the drain field runs close to the foundation, the county may require the window to shift or shrink. We flag this at the estimate and adjust the scope before you apply for the permit.
- Fogged glass from trapped humidity. Conway’s humidity finds every failed seal. Once moisture gets between panes, the window’s insulating value drops and the glass needs replacing. Repairs are straightforward, but they do not fix themselves.
Pricing for Window Replacement in Conway, FL
A single insert window replacement in Conway typically runs $600 – $1,200 installed. Full-frame replacements run $1,200 – $2,800 per window, with the higher end applying to oversized lakefront openings, impact-rated glass, and block homes needing structural furring or lintel work. Most whole-home projects in Conway land between $12,000 and $28,000 for ten to fourteen windows. What moves the price: whether you need impact glass (adds $400 – $800 per window), whether the county requires a site plan review for detached structures, and whether we’re dealing with steel lintels in older block construction. You’ll get a written line-item quote before any work starts. Not a range. A number. Call (850) 493-7894 for a free estimate.
Serving Conway and Cities Nearby
We serve all of Conway, from the lakefront homes along the Conway Chain of Lakes to the ranches off Michigan Street and the newer developments near Hoffner Avenue. We also regularly work in Window Replacement in Conway‘s neighboring cities: Orlando, Deltona, Sanford, and St. Cloud. If you’re in one of those areas, the same crew, the same written guarantee, and the same live phone line apply.
Serving Conway, FL - Our Local Coverage Area
We’re based in the Conway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Conway
Yes, most window replacements in unincorporated Orange County require a building permit, especially when you’re changing the size or type of the opening, adding egress, or switching from jalousie to impact-rated units. Some insert replacements that match the existing opening dimensions may qualify for a simplified permit path, but the county reserves the right to require a full review if the windows face a septic drain field or well setback. We handle the permit application and submit final inspection paperwork after install, so you’re never left to sort out compliance on your own. Call (850) 493-7894 and we’ll tell you exactly what your project needs.
In most Conway homes, no. Jalousie windows sit in narrow frames with a crank mechanism and glass slats, and the rough opening is rarely deep enough or square enough to accept an impact-rated casement or fixed window without some reframing or furring. We replaced eight original jalousie windows on a 1960s lakefront home off Anderson Street with PGT impact-rated casements; the old aluminum frames rattled in every afternoon storm, and the homeowner’s cooling bills dropped 28% after we installed Low-E insulated glass units. The wall structure changed modestly, but the permitting path stayed simple because we did the structural work under the same window permit.
Orange County generally requires a 10-foot setback between any new foundation penetration (including an egress window well) and the nearest septic drain field line. On smaller Conway lots where the ADU sits close to the drain field, this rule can force you to shift the window to a different wall or shrink the opening. We review your survey and septic drawing before we quote the job so you don’t apply for a permit that gets denied. Call (850) 493-7894 and have your property survey ready.
Yes, and Conway is one of the better places in Florida to see the savings. Single-pane aluminum windows conduct heat directly into the house, and in a humid climate, you pay to dehumidify every cubic foot of air that leaks in. Low-E insulated glass units (a thin coating that reflects heat back out in summer while letting light through) cut solar heat gain and air leakage. Our field measurements on Conway homes show cooling-load reductions of 20 – 30% after a full retro-fit, especially on older block homes with original windows. Your exact savings depend on roof insulation and shade, but the direction is predictable.
No. Florida Statute 627.0629 allows partial mitigation credits when impact-rated windows are installed on windward-facing openings and all openings have some form of approved protection. However, insurers differ in how they apply partial credits, and some require all windows and doors to meet the same impact standard before they’ll issue the full credit. We recommend a wind mitigation inspection after the project so you have documentation for your carrier. Call (850) 493-7894 and we’ll walk you through what your specific opening count means for the credit.
Written by Owen Satterfield, Owner at Westlight Windows Orlando, serving Conway since 2009.
Six Reasons Homeowners Choose Westlight Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.