New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across South Apopka
Window installation in South Apopka means dealing with a specific set of problems: jalousie windows that leak during every afternoon thunderstorm, aluminum frames corroded by humid subtropical air, and concrete block homes where rough openings were never framed to modern standards. Westlight Windows Orlando has been handling exactly these jobs since 2009, and we show up in the window we gave you, with a written price in hand before any work starts. If you’re researching window replacement on 13th Street or Marvin C. Zanders Avenue, call (850) 493-7894 and a real person answers, 24/7.
Why Westlight Windows Orlando Is South Apopka’s Preferred Window Installation Company
Homeowners in South Apopka call us because we understand what gets hidden inside these walls. The housing stock here runs heavily to single-family ranch-style and concrete block homes built from the 1950s through the 1980s, many still sitting on original single-pane aluminum windows. That means we are not showing up to measure for a clean swap. We are showing up to find out whether the rough opening is square, whether the jamb has rotted behind the trim, and whether the wiring behind that wall is going to trigger a code correction once the permit is pulled.
Owen Satterfield runs our team with a simple rule: say the price before the work. That means you get a written line-item quote for your South Apopka window installation before we touch a screw. No revised invoice at the door. No vague range that doubles after demolition. Our background-checked, uniformed technicians arrive in the window we gave you, do the work, leave the job site cleaner than they found it, and hand you a written guarantee when they walk out.
We are an independently owned and operated Kingswell location. Dispatch and scheduling for South Apopka are coordinated from our South Florida office, but the crews installing your windows are local and know these streets. We answer the phone with a live person around the clock, because the last thing you need after a storm blows a jalousie slat sideways is a voicemail box.
Bay Window Installation in South Apopka
Bay window installation in South Apopka usually means pulling a failed aluminum picture window out of a 1960s ranch and rebuilding the projection with something that actually seals. A bay window replaces a flat window with a three-dimensional bump-out, which gives you a wider view, better daylight, and a small shelf of interior space, but only if the framing underneath is solid. In South Apopka, where humid air and termite pressure are both constant, we open the wall first and inspect before we order anything.
What the Job Actually Involves
We remove the old window, strip the rough opening down to the studs and buck framing, and check for rot, rusted fasteners, and failed waterproofing. In older South Apopka block homes, we often find the original window was set directly into masonry with nothing more than caulk. We reframe the opening with pressure-treated lumber, flash it properly, set the new bay unit, and tie the roof or overhang above the projection into the existing eaves so water drains away instead of into the wall.
South Apopka Pricing Reality
A bay window installation in South Apopka typically runs $2,800 to $5,400 installed, depending on the size of the projection, the glass package, and whether the existing opening needs structural repair. Impact-rated PGT units with laminated glass run at the upper end. When the permit inspection turns up old ungrounded wiring behind the wall, the electrical correction gets written into the contract allowance before we touch it, never as a surprise add-on after the fact.
Window Contractor in South Apopka
A window contractor in South Apopka has to be more than an installer. The homes here hide problems, and the contractor who ignores them is the reason you are reading this page instead of just calling the last company you used. Westlight handles the full scope: measuring, permitting, reframing, flashing, setting, trimming, and the code corrections that surface once walls are open.
Permits and Code Corrections
South Apopka sits in Orange County, and window replacement that changes the opening size or involves structural framing pulls a permit. Older homes on 13th Street and Marvin C. Zanders Avenue frequently have knob-and-tube or ungrounded aluminum branch circuits behind the drywall. A permit inspection flags that wiring. We plan for it. Our quotes include a written allowance for electrical correction, and any actual cost is priced and approved in writing before we touch a wire.
What a Good South Apopka Window Contractor Should Do
Show up. Give you a written price before work starts. Pull the permit. Pass the inspection. Leave the site clean. Hand you a written guarantee. And if something fails within the guarantee period, come back and fix it at no charge. That is the Kingswell Guarantee, and it governs every job we do in South Apopka, from a single casement swap to a full-house window replacement.
Trusted Brands We Service in South Apopka
We carry eight manufacturer lines so the right product lands on the job instead of forcing the job to fit one brand. For South Apopka’s humidity and hurricane exposure, we frequently recommend PGT impact-rated windows, ECO Window Systems for strong thermal performance at a fair price, and Therma-Tru for entry doors that handle rain without swelling. We keep parts and hardware for these lines stocked, which means quicker turnarounds when a South Apopka homeowner needs a sash replaced or a window serviced after a storm.
Common Window Installation Problems We See in South Apopka Homes
- Jalousie windows leaking on 13th Street and Marvin C. Zanders Avenue. Every slat is a separate unsealed opening, so during a summer thunderstorm, water drives in between the glass and soaks the jamb. After enough moisture cycles, the wood swells and the sashes wedge permanently shut. We replace these with sealed, impact-rated units and reframe the opening.
- Corroded single-pane aluminum frames in 1950s – 1980s ranch homes. Salty Atlantic rain collects at the frame corners and eats the aluminum, while the original mortar around the window crumbles. Fastening a new window into that without reframing is a warranty claim waiting to happen. We pull the old frame, repair or replace the buck, and hang the new window on solid structure.
- Condensation between panes on double-glazed retrofits. South Apopka’s humid subtropical climate means a failed seal shows up fast: fog between the glass, water stains on the sill, and a cooling bill that climbs every summer. The fix is a full frame replacement when the IGU has failed, not a sash-only bandage.
- Ungrounded wiring discovered during a window permit inspection. Opening a wall for a full-frame replacement in a 1960s concrete block ranch frequently exposes knob-and-tube or ungrounded aluminum branch circuits. The inspector will flag it. We write the electrical upgrade into the contract allowance up front, so the window installation price does not move after demolition starts.
Pricing for Window Installation in South Apopka, FL
Most single-window replacements in South Apopka run $650 to $1,450 installed for a standard double-hung or casement unit. Horizontal roller windows and awnings fall in the same range. Picture and fixed windows run $500 to $1,200, depending on glass package. Bay and bow window installations start around $2,800 and climb from there, as covered above. What moves the number in South Apopka specifically: whether the original jalousie or aluminum frame left salvageable rough framing, whether impact glazing is required, and whether the permit inspection triggers an electrical correction. You will get a written price before any work starts, on every single job. Call (850) 493-7894 for a free estimate and we will put it in writing.
We Also Serve Cities Near South Apopka
While this page focuses on South Apopka, our crews regularly handle Window Installation in Orlando, Deltona, Sanford, and St. Cloud. If you live in one of those nearby cities and need a quote, the same written-price promise applies. For more on our local work, see Window Installation in South Apopka.
Serving South Apopka, FL - Our Local Coverage Area
We’re based in the South Apopka area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in South Apopka
Because the original window frames are usually failing, not just the sashes. In the 1950s – 1980s ranch and concrete block homes that dominate South Apopka, aluminum frames corrode at the corners, wooden jambs rot from jalousie leaks, and the rough opening often lacks modern buck framing. Sash-only replacement leaves all of that in place. Full frame replacement lets us reframe, flash, and seal correctly, and it is the only option that fixes the root cause. Call (850) 493-7894 for an exact quote and we will tell you what your walls actually need.
Not because of the windows themselves. But opening a wall for full-frame impact window installation in older South Apopka homes often exposes ungrounded aluminum branch circuits or knob-and-tube wiring behind the drywall. The permit inspector’s job is to flag it. When that happens, the electrical correction is a separate code item, and we pre-plan an allowance for it in your written contract so the price does not move once the wall is open.
We remove the old window and inspect the rough opening down to the masonry. In concrete block homes, we often find the original window was set directly into the block with nothing but caulk, which fails after a few decades of South Apopka’s rain and humidity. We reframe the opening with pressure-treated buck lumber, install a sill pan, flash the jambs and head correctly, and set the new window on a properly sloped sill so water drains outward. If you are dealing with leaks around an existing window, call (850) 493-7894 and we will come inspect it.
Both are impact-rating certifications for hurricane-prone regions, but Miami-Dade NOA is the stricter standard: it requires the product to pass more demanding wind and impact testing. Florida Product Approval is a broader state-level certification. For South Apopka, which is in an Atlantic hurricane threat zone, we recommend Miami-Dade NOA-rated windows when the budget allows, and Florida Product Approved units are the minimum we install for impact protection. We will show you the specific ratings for any window we quote.
Yes, and the difference is noticeable within the first full summer. Jalousie windows have multiple unsealed glass slats that let conditioned air escape and humid outside air in, around the clock. Replacing them with a sealed, double-glazed unit with low-e glass (a thin coating that reflects heat back into the room in winter and out in summer) cuts that air loss almost entirely. Most South Apopka homeowners see their cooling load drop by 15 to 25 percent after jalousie replacement. Call (850) 493-7894 for a free estimate on replacing yours.
Written by Owen Satterfield, Owner at Westlight Windows Orlando, serving South Apopka since 2009.
Six Reasons Homeowners Choose Westlight Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.